Both Stinger models 6000T & 6000S Positioners have a motorized variable speed rotation with Forward-Stop-Reverse switch
and dynamic braking. The inverter controlled rotation speed is variable from 0.05 to .80 RPM with 115 degree
forward tilt powered by a 2 H.P. AC motor. A self locking jack screw assembly produces a tilt torque of
111,375- inch pounds. The 40″ round table with 3 pre-drilled holes is standard for easy chuck mounting.
The positioner operates on 460 volt, three phase, 60 cycle input power. A plug in hand pendant includes
a “Forward-Stop-Reverse” switch along with a speed adjustment potentiometer on 25′ of cable.
Standard pre-loaded Timken bearings are protected by a heavy-duty welding rotoground assembly.
Load Capacity …………………………………….6000 Lb. 12″ overhung from face of table.
Rotational Motor Size…………..…………..…… 2 H.P. AC Motor
Rotation Speed………………..……….………….Variable from .05 to .80 RPM
Rotation Torque………………………………….. 72,000 Inch Lbs.
Tilt Range……………..………………………… 0 through 115 degrees, power tilt w/ limit switches
Tilt Torque…………………………….…………. 111,375 Inch Lbs.
Tilt Motor Size…………….……………………. 2 H.P. AC Brakemotor.
Swing Radius…………………………………… 38-3/4″ @ 90 degrees
Shipping Weight………………………………….2540 Lbs